有没有壳牌DEP的最新版文件?

云智的各位大神,有没有SHELL DEP的最新版本,可否分享一下? 文章源自云智设计-https://www.cidrg.com/ideabank/questions/18020.html

    • 大V快跑
      大V快跑 4

      我有一套SHELL DEP 2017版,不知道是不是最新版
      1.Adminnistrative (Indices)管理类(索引)
      1 DEP 00.00.05-05-Gen A Global technical standards index 技术标准索引
      2 DEP 00.00.06-06-Gen A Standard drawings index 标准图索引
      3 DEP 00.00.10-05-Gen A Standard forms index 标准表格索引
      4 DEP 30.10.01.10-Gen A Requistions index 申请书索引
      2.Adminnistrative (Technical Standards Team)管理类(技术标准)
      1 DEP 00.00.00-30-Gen Procedure for global technical standards publications 标准发布程序
      2 DEP 00.00.07-30-Gen A Application of a functional specification(endorsement of ISO 13879, ISO 13880 and ISO/TR 13881) 功能性规范的应用(对ISO 13879, ISO 13880 and ISO/TR 13881的认可)
      3 DEP 00.00.20-10-Gen A The use of SI quantities and units (Endorsement of ISO/IEC 80000) SI 量纲和单位的使用(对ISO/IEC 80000的认可)
      3.Analytical 分析类
      1 DEP 32.31.56.30-Gen A Implenmentation of near-infrared systems for main fuels blending 近红外系统在主燃料混合中的应用
      2 DEP 34.17.10.31-Gen A Laboratories 实验室
      4.Civil, Structural & Offshore土建,结构和平台
      1 DEP 30.46.00.31-Gen. A Thermal insulation 保温
      2 DEP 30.48.00.34-Gen. Phosphate-conversion coatings for marine equipment 用于海底设备的磷酸盐涂料
      3 DEP 30.48.30.31-Gen. A Cement lining of pipes (based on EN 10298) 管道混凝土涂层(基于EN10298)
      4 DEP 30.48.60.12-Gen. Design and installation of chemical-resistant protection systems for concrete surfaces (based on EN 14879-Parts 1, 3, 5 and 6) 混凝土表面耐化学保护系统的设计和安装(对EN14879第1,3,5,和6部分的增补)
      5 DEP 31.06.15.10-Gen. A offshore Marine loading arms (amendments/supplements to OCIMF design and construction specification for marine loading arms) 港口输油装卸臂(对OCIMF港口输油装卸臂设计和施工技术要求的增补)
      6 DEP 31.40.10.22-Gen. offshore Top Tension Riser Tensioning Systems 顶张力立管系统
      7 DEP 34.00.01.10-Gen. A Earthquake design for onshore facilities – Seismic hazard assessment 陆上设施地震设计-地震危害评估
      8 DEP 34.00.01.30-Gen. A Structural design and engineering of onshore structures 陆上结构设计
      9 DEP 34.11.00.10-Gen. A Onshore and nearshore site investigations 陆上和近海现场调研
      10 DEP 34.11.00.11-Gen. A Site preparation and earthworks including tank foundations and tank farms 大罐基础和罐区的现场准备和土方工程
      11 DEP 34.11.00.12-Gen. A Geotechnical and foundation engineering – onshore 岩土和基础设计-陆上
      12 DEP 34.13.20.31-Gen. A Roads, paving, surfacing, cable trenches, slope protection and fencing 道路、人行道、厂区平整、电缆沟、护坡和围墙
      13 DEP 34.14.20.31-Gen. A Drainage systems and primary treatment facilities 排污系统和一次处理系统
      14 DEP 34.17.00.32-Gen. A Design and engineering of buildings 建筑物设计
      15 DEP 34.17.10.30-Gen. A Design of blast resistant onshore buildings, control rooms and field auxiliary rooms 陆上建筑物、控制室和现场辅助用房的抗爆设计
      16 DEP 34.17.10.33-Gen. A Portable blast resistant modules 便携式抗爆模块
      17 DEP 34.17.10.34-Gen. A Requirements for mobile and construction camps 移动式营地的要求
      18 DEP 34.19.19.11-Gen. Grouting of equipment and structure bases 设备和结构 基础的灌浆
      19 DEP 34.19.20.11-Gen. A Passive fire protection for onshore facilities 陆上设施的被动消防
      20 DEP 34.19.20.31-Gen. A Reinforced concrete structures 钢筋混凝土结构
      21 DEP 34.24.26.31-Gen. A Chimneys selection, design and engineering (based on EN 1992-1-1,EN 1993-3-2, EN 1443, EN 13084 Parts 1, 2, 4, 5, 6, 7 and 8) 烟囱的选型和设计(基于EN1992-1-1,EN1993-3-2,EN1443,EN13084第1,2,3,5,6,7和8部分)
      22 DEP 34.28.00.31-Gen. A Onshore steel structures 陆上钢结构
      23 DEP 34.28.00.33-Gen. Onshore ancillary steel structures 陆上钢结构附件
      24 DEP 34.28.00.34-Gen. Onshore flare derrick structures 陆上放空火炬塔架结构
      25 DEP 34.51.01.32-Gen. A Full containment refrigerated LNG tanks LNG冷冻全容罐
      26 DEP 34.51.01.34-Gen. Full containment refrigerated LPG tanks LPG冷冻全容罐
      27 DEP 34.51.01.37-Gen. Membrane type refrigerated LNG tanks 膜式冷冻LNG储罐
      28 DEP 35.00.00.10-Gen. offshore Vessel Integrity, Marine Systems – Requirements for Selection and Operation of Vessels (Endorsement of DNV RP-H104) 海上系统压力容器-压力容器选型和操作技术要求(对DNV RP-H104的认可)
      29 DEP 35.00.10.10-Gen. A offshore Design of jetty facilities (amendments/supplements to BS 6349-1, 1.1/1.3/ 1.4, BS 6349-2 and BS 6349-4) 码头的设计(对BS6349-1,1.1/1.3/1.4,BS6349-2和BS6349-4的增补)
      30 DEP 35.00.10.11-Gen. offshore Jetty gangways 码头通道
      31 DEP 37.00.10.10-Gen. A offshore Metocean design and operating considerations (endorsement of ISO 19901-1:2015) 海洋气象设计和操作注意事项(对ISO19901-1:2015的背书)
      32 DEP 37.00.10.11-Gen. offshore Metocean data acquisition – definition, implementation and analysis 海洋气象数据采集-定义,采集和分析
      33 DEP 37.00.10.12-Gen. A offshore Metocean data acquisition – Real time systems 海洋气象数据采集-实时系统
      34 DEP 37.00.10.13-Gen. offshore Arctic offshore structures (amendments/supplements to ISO 19906) 北极海上结构(对ISO19906的增补)
      35 DEP 37.00.10.14-Gen. offshore Metocean design and operating considerations for offshore and onshore structures – Adaption to climate change
      36 DEP 37.01.10.11-Gen. A offshore Design of offshore topsides facilities against fire and blast loading (amendments/supplements to API RP 2FB)
      37 DEP 37.11.00.30-Gen. A offshore Site specific assessment of mobile offshore jack-up units (amendments/supplements to ISO 19905-1)
      38 DEP 37.17.10.10-Gen. A offshore Design of offshore living quarters
      39 DEP 37.17.10.11-Gen. A offshore Design of offshore temporary refuges
      40 DEP 37.19.00.10-Gen. A offshore Offshore structures – General requirements (endorsement of ISO 19900)
      41 DEP 37.19.00.11-Gen. offshore Offshore structures – Weight control during engineering and construction (amendments/supplements to ISO 19901-5)
      42 DEP 37.19.00.12-Gen. offshore Offshore topsides structures (amendments/supplements to ISO 19901-3:2010)
      43 DEP 37.19.00.13-Gen. offshore Fixed concrete offshore structures (amendments/supplements to ISO 19903:2006)
      44 DEP 37.19.00.14-Gen. offshore Seismic design procedures and criteria – offshore (amendments/supplements to ISO 19901-2)
      45 DEP 37.19.00.30-Gen. A offshore Fixed steel offshore structures (amendments/supplements to ISO 19902:2007)
      46 DEP 37.19.10.30-Gen. A offshore Weldable structural steels for fixed offshore structures (amendments/supplements to EN 10225 and EN 10025)
      47 DEP 37.19.10.31-Gen. offshore Glass reinforced plastic (GRP) gratings for offshore installations
      48 DWS 37.19.20.11-Gen. offshore Weight management plan for floating platforms (amendments/supplements to ISO 19901-5)
      49 DEP 37.81.00.11-Gen. offshore Offshore coordination team management and construction hook-up work planning
      50 DEP 37.81.10.10-Gen. A offshore Generic design and analysis for steel catenary risers and catenary umbilical systems for offshore structures
      51 DWS 37.81.10.11-Gen. offshore Design and analysis of top tension risers for deepwater offshore floating structures (based on API RP 2RD/ISO WD 13628-12)
      52 DEP 37.81.10.12-Gen. offshore Design of anchor piles for mooring systems (based on API RP 2SK)
      53 DEP 37.81.10.13-Gen. offshore Global design and analysis of permanently moored deepwater floating production systems (amendments/supplements to API RP 2FPS, API RP 2SK and API RP 2SM)
      54 DEP 37.81.10.14-Gen. offshore Global design and analysis of deepwater tension leg platforms (amendments/supplements to API RP-2T)
      55 DEP 37.81.10.16-Gen. offshore Geotechnical design of foundations for deepwater subsea systems
      56 DEP 37.81.10.17-Gen. offshore Design of piles for subsea pipeline initiation and anchoring
      57 DWS 37.81.10.18-Gen. offshore Design specification for deepwater tension leg platform, semisubmersible and spar hull (based on API RP 2T and API RP 2FPS)
      58 DEP 37.81.10.19-Gen. offshore Marine operations requirements – Loadout, transportation and installation of offshore structures (amendments/supplements to ISO 19901-6)
      59 DEP 37.81.10.20-Gen. offshore Design of driven pile foundations for tension leg platforms (based on API RP 2T)
      60 DEP 37.81.10.21-Gen. offshore Structural design of tendon systems for deepwater offshore tension leg platforms (amendments/supplements to API RP 2T)
      61 DEP 37.81.10.30-Gen. offshore Design, fabrication and testing requirements for deepwater project VIV suppression strakes for SCR’s, TTR’s, umbilicals, TLP tendons and jumpers
      62 DEP 37.81.10.31-Gen. offshore Structural steel design of small deepwater offshore skids, facility packages, and subsea sleds and manifolds (based on AISC Steel Construction Manual ASD, API RP 2A-WSD and AWS D1.1)
      63 DEP 37.81.10.32-Gen. offshore Structural steel fabrication of small deepwater offshore skids, facility packages, and subsea sleds and manifolds (based on AISC steel construction manual ASD, API RP 2A-WSD and AWS D1.1)
      64 DEP 37.81.10.33-Gen. offshore Structural welding and inspection of deepwater floating production systems (amendments/supplements to AWS D1.1/D1.1M:2008)
      65 DEP 37.81.10.34-Gen. A offshore Structural fabrication of deepwater floating production systems
      66 DWS 37.81.10.36-Gen. offshore Structural steel design of deepwater offshore topsides decks for floating systems
      67 DEP 37.81.10.38-Gen. offshore Design, fabrication and testing requirements of permanent VIV suppression fairing systems for offshore structures
      68 DEP 37.81.20.30-Gen. offshore Manufacture, testing, and inspection of carbon and low-alloy steel castings Grades 345-586 N/mm2 (50-85 KSI) for primary steel applications in deepwater offshore structures and pipelines
      69 DEP 37.81.20.33-Gen. offshore Manufacture, testing, and inspection of weldable structural steel plate grades 345 552 N/mm2 (50-80 ksi) for special/critical steel applications in deepwater offshore structures (based on ASTM A20)
      70 DEP 37.81.20.34-Gen. offshore Manufacture, testing, and inspection of weldable structural steel plate grades 345-552 N/mm2 (50-80 ksi) for primary steel applications in deepwater offshore structures (based on ASTM A6)
      71 DWS 37.81.20.35-Gen. offshore Technical specification for elastomeric flexible joints for use in deepwater offshore dynamic riser applications
      72 DEP 37.81.20.36-Gen. offshore Syntactic foam buoyancy modules for use in deepwater offshore dynamic riser applications
      73 DEP 37.81.20.37-Gen. offshore Manufacture, testing, and inspection of carbon and low-alloy steel forgings for special/critical steel applications in deepwater offshore structures and pipelines
      74 DEP 37.81.20.38-Gen. offshore Manufacture, testing, and inspection of weldable structural rolled shapes grades 345-483 N/mm2 (50-70 KSI) for primary steel applications in deepwater offshore structures (based on ASTM A6)
      75 DEP 37.81.20.39-Gen. offshore Manufacture, testing, and inspection of carbon and low-alloy steel forgings for primary steel applications in deepwater offshore structures and pipelines (based on ASTM A788, ASTM A961 and MSS SP-75)
      76 DEP 37.81.21.30-Gen. offshore Manufacture, testing, and inspection of permanent mooring system chain and accessories for floating structures (based on DNV-OS- E302)
      77 DEP 37.81.21.31-Gen. offshore Permanent Mooring System Wire Rope, Sockets, Pins and Connectors for Deepwater Floating Structures (Based on DNV-OS- E304)
      78 DEP 37.81.21.32-Gen. offshore Surface preparation, materials, application, and quality control testing of aluminum-ceramic basecoat with resin-bonded fluorocarbon topcoat coating systems for deepwater offshore equipment
      79 DEP 37.81.21.33-Gen. offshore Surface preparation, materials, application, and quality control testing of low friction corrosion resistant fluorocarbon coating systems for deepwater offshore equipment
      80 DEP 37.81.21.34-Gen. offshore Thermal-sprayed ceramic coating requirements 热喷涂陶瓷涂层技术要求
      81 DEP 37.81.21.35-Gen. offshore General requirements for top tensioned riser tendon and mooring equipment for deepwater floating production systems
      82 DEP 37.81.41.40-Gen. offshore 9-5/8 inch riser threaded connector, gauging specification/quality plan
      83 DEP 37.81.41.41-Gen. offshore 10-3/4 inch riser threaded connector, gauging specification/quality plan
      84 DEP 37.81.41.42-Gen. offshore 12-3/4 inch riser threaded connector, gauging specification/quality plan
      85 DEP 37.81.41.43-Gen. offshore 14 inch riser threaded connector, gauging specification/quality plan
      86 DEP 37.90.10.30-Gen. offshore General requirements for large customized FPSOs
      87 DEP 37.90.10.32-Gen. A offshore Dynamically positioned (DP) vessels for construction, drilling/completions/well intervention activities – selection and operation
      88 DEP 37.90.10.34-Gen. offshore Selection and application of synthetic rope for wet towing of large offshore structures
      89 DEP 37.91.10.10-Gen. A offshore Single point mooring (SPM) systems
      90 DEP 37.91.10.11-Gen. A offshore Mobile mooring systems (amendments/supplements to API RP 2SK, API RP 2SM and API RP 2I)
      91 DEP 37.91.10.30-Gen. offshore Mooring and berthing systems, including fenders, quick release hooks, and docking aid systems
      92 DEP 37.91.20.30-Gen. A offshore Oil loading and discharge hoses for offshore mooring installations (amendments/supplements to OCIMF guide to manufacturing and purchasing hoses for offshore moorings (GMPHOM 2009))
      93 DEP 37.92.10.30-Gen. A offshore Offshore pedestal-mounted cranes (amendments/supplements to API SPEC 2C)
      94 DEP 39.01.10.33-Gen. offshore Floating structure top-tensioned riser seamless tubular requirements
      95 DEP 39.01.20.35-Gen. offshore TLP tendon and floating structure top-tensioned riser seam-welded tubular requirements
      96 DEP 39.01.20.36-Gen. offshore TLP tendon and floating structure top-tensioned riser girth welding and inspection requirements
      97 DEP 39.40.20.32-Gen. offshore Elastomeric flexible elements for use in TLP tendons
      98 DEP 40.10.01.12-Gen. offshore Polyester rope for deepwater mooring (amendments/supplements to abs guidance notes on the application of fiber rope for offshore mooring)
      99 DEP 60.00.10.13-Gen. Mobile crane foundation assessment 移动式起重机基础评估
      100 DEP 80.00.10.11-Gen. A Layout of onshore facilities 陆上设施平面布置
      101 DEP 80.00.10.12-Gen. A offshore Layout of offshore facilities
      102 DEP 80.80.00.10-Gen. A offshore Lifeboats and rescue boats (amendments/supplements to SOLAS, LSA and DNV-OS-E406)
      103 DEP 80.80.00.14-Gen. offshore Offshore facilities life-saving appliance requirements
      5.Electrical电气
      1 DEP 33.64.10.10-Gen. A Electrical engineering design 电气工程设计
      2 DEP 33.64.10.17-Gen. A Application of protective functions for electrical systems for global application 电气系统保护功能的应用
      3 DEP 33.64.10.32-Gen. A Electrical network monitoring and control system for industrial networks 工业用电电网监测和控制系统
      4 DEP 33.64.10.33-Gen. A Electromagnetic compatibility (EMC) 电磁兼容性(EMC)
      5 DEP 33.64.20.10-Gen. A North American Electrical engineering design for North American application 北美地区电气工程设计
      6 DEP 33.64.30.30-Gen. North American Electrical requirements for vendor supplied skid units for North American application 北美地区对撬装化供货商的要求
      7 DEP 33.65.11.31-Gen. A Synchronous AC machines (amendments/supplements to IEC 60034-1 and IEC 60034-14) 同步交流电机(对IEC60034-1和IEC60034-14的增补)
      8 DEP 33.65.11.32-Gen. A Packaged alternating current generator sets 整装交流发电机组
      9 DEP 33.65.11.34-Gen. North American Synchronous AC machines for North American application (amendments/supplements to API 546) 用于北美地区的同步交流电机(对API546的增补)
      10 DEP 33.65.11.35-Gen. Packaged unit AC generator sets for North American applications 用于北美地区的整装交流发电机组
      11 DEP 33.65.40.31-Gen. A North American Power transformers (amendments/supplements to IEC 60076-1 and IEC 60076-11) 变压器(对IEC60076-1和IEC60076-11的增补)
      12 DEP 33.65.40.32-Gen. Liquid-immersed transformers for North American application 油浸式变压器在北美地区的应用
      13 DEP 33.65.50.31-Gen. A Static uninterruptible power supply unit (static UPS unit) 静态不间断电源
      14 DEP 33.65.50.33-Gen. North American Design and fabrication of uninterruptible power supplies for North American applications 用于北美地区不间断电源的设计和制造
      15 DEP 33.65.60.30-Gen. A Solar power systems 太阳能供电系统
      16 DEP 33.66.05.31-Gen. A Electrical machines – Cage-induction types (amendments/supplements to IEC 60034-1 and IEC 60034-14) 笼式感应电机(对IEC60034-1和IEC60034-14的增补)
      17 DEP 33.66.05.32-Gen. North American AC electrical adjustable speed drive systems – Rated 375 KW and larger for North American application (amendments to IEEE STD 1566:2005) 交流电调速系统在北美地区的应用-额定功率大于等于375kW(对IEEE1566-2005的增补)
      18 DEP 33.66.05.33-Gen. A A.C. electrical variable speed drive systems 交流电机调速系统
      19 DEP 33.66.05.35-Gen. North American LV induction motors for North American application (amendments/supplements to IEEE Std 841) 低压感应发电机在北美的应用(对IEEE841的增补)
      20 DEP 33.66.05.36-Gen. North American MV induction motors for North American application (amendments/supplements to API STD 541) 中压感应发电机在北美的应用(对API541的增补)
      21 DEP 33.66.05.37-Gen. North American General-purpose form-wound squirrel cage induction motors –250 horsepower and larger for North American application (amendments/supplements to API 547) 通用模绕笼式感应发电机在北美地区的应用-大于等于250hp(对API547的增补)
      22 DEP 33.66.05.38-Gen. North American Design and fabrication of MV motor control centres for North American application (amendments to UL 347/CAS C22.2 No. 253-09) 北美地区中压电机控制中心的设计和制造(对UL347/CAS C22.2 No. 253-09)
      23 DEP 33.66.05.39-Gen. North American Design and fabrication of low voltage motor control centres for North American application (amendments/supplements to UL 845/CSA C22.2 NO. 254-05) 北美地区低压电机控制中心的设计和制造(对UL845/CAS C22.2 No. 254-05)
      24 DEP 33.67.01.31-Gen. A Low voltage switchgear and controlgear assemblies(amendments/supplements to IEC 61439) 低压开关柜和控制设备(对IEC61439的增补)
      25 DEP 33.67.01.32-Gen. North American Design and fabrication of LV switchgear for North American applications (amendments/supplements to IEEE C37.10.1) 北美地区低压开关柜的设计和制造(对IEEE C37.10.1的增补)
      26 DEP 33.67.40.30-Gen. North American Design and fabrication of MV switchgear for North American applications (amendments/supplements to IEEE C37.20.2) 北美地区中压开关柜的设计和制造(对IEEE C37.20.2的增补)
      27 DEP 33.67.40.31-Gen. North American Design and fabrication of MV metal-enclosed interrupter switchgear for North American applications (amendments/supplements to IEEE C37.20.3:2006) 用于北美地区的中压金属框架开关柜的设计和制造(对IEEE C37.20.0:2006的增补)
      28 DEP 33.67.51.31-Gen. A High-voltage switchgear and control gear assemblies for rated voltages between 1 kV and 52 kV (amendments/supplements to IEC 62271-200) 额定电压范围为1kV-52kV的高压开关和控制器(对IEC62271-200的增补)
      29 DEP 33.67.51.32-Gen. Gas-insulated, metal-enclosed switchgear and controlgear for rated voltages above 52 kV (amendments/supplements to IEC 62271-203) 额定电压大于52kV的气体保护金属框架开关柜和控制器(对IEC62271-203的增补)
      30 DEP 33.68.30.31-Gen. A Electrical heating system for frost heave prevention of refrigerated hydrocarbon storage tanks 烃类低温储罐防冻胀电加热系统
      31 DEP 33.68.30.32-Gen. A Electrical trace heating 电伴热系统
      32 DEP 33.68.30.33-Gen. A Electrical process heaters 电加热器
      33 DEP 33.68.30.34-Gen. Electrical trace heating for North American application 电伴热在北美地区的应用
      34 DEP 33.68.30.35-Gen. Electrical process heaters for North American application 电加热器在北美地区的应用
      35 DEP 33.80.00.30-Gen. A offshore Navigational aids for fixed offshore structures 固定海上设施航标
      36 DEP 34.17.10.37-Gen. North American Design and fabrication of modular electrical power centers for North American application 北美地区模块化电站的设计和制造
      37 DEP 63.10.08.11-Gen. A Field commissioning of electrical installations and equipment for global application 电气设备现场调试
      38 DEP 63.20.08.10-Gen. North American Electrical installation for North American application 北美地区电气设备安装
      39 DEP 80.00.10.13-Gen. A North American Area classification and electrical equipment spacing for North American application (amendments/supplements to API RP505/ API RP500) 北美地区区域划分和电气设备间距(对API505/API500的增补)
      40 DEP 80.64.10.10-Gen. A Electrical safety rules 电气安全规则
      41 DEP 80.64.10.11-Gen. Static electricity 静电
      6.Health健康
      1 DEP 30.00.60.10-Gen. A Human factors engineering in projects 项目中的人因工程
      2 DEP 30.00.60.13-Gen. A Human factors engineering – valves 人因工程-阀门
      3 DEP 30.00.60.15-Gen. A Human factors engineering – control room design 人因工程-控制室设计
      4 DEP 30.00.60.16-Gen. A Human factors engineering – Human machine interface design for situation awareness 人因工程-情景感知的人机界面设计
      5 DEP 30.00.60.18-Gen. A Human factors engineering – Design and procurement of skid- packaged units 人因工程-撬装化单元的设计和采购
      6 DEP 30.00.60.19-Gen. A Human factors engineering – Design for human reliability 人因工程-人的可靠性设计
      7 DEP 30.00.60.20-Gen. Human factors engineering – Workspace design 人因工程-工作空间设计
      8 DEP 30.00.60.21-Gen. Human factors engineering – labelling of facilities, equipment and piping 人因工程-设施、设备和配管的标识
      7.Maritime Operations海上操作
      1 DEP 35.00.00.11-Gen. Wet towing of mobile offshore (drilling) units 海上钻井设备的湿拖
      8. Mechanical, Material & Integrity设备,材料
      1 DEP 02.00.00.10-Gen. A Preparation of technical drawings 机制图纸的准备
      2 DEP 30.10.02.11-Gen. A Metallic materials – Selected standards 金属材料标准的选择
      3 DEP 30.10.02.13-Gen. A Non-metallic materials – selection and application 非金属材料的选择和应用
      4 DEP 30.10.02.14-Gen. Carbon steel corrosion engineering manual for upstream facilities 上游设施碳钢防腐设计手册
      5 DEP 30.10.02.16-Gen. A Evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking (amendments/supplements to NACE TM0284) 管道和压力容器用钢防止氢致开裂的评价(对NACE TM0284的增补)
      6 DEP 30.10.02.17-Gen. A Wet H2S requirements for downstream process equipment and piping 下游工艺设备和管线在湿硫化氢环境下的技术要求
      7 DEP 30.10.02.31-Gen. A Metallic materials – prevention of brittle fracture in new assets 金属材料-防止新建设施中的脆性破坏
      8 DEP 30.10.02.32-Gen. A Materials and fabrication requirements for 2¼Cr-1Mo, 2¼Cr-1Mo-¼V,3Cr-1Mo & 3Cr-1Mo-¼V heavy wall pressure vessels (amendments/supplements to API RP 934-A) 用于厚壁压力容器的 2¼Cr-1Mo, 2¼Cr-1Mo-¼V,3Cr-1Mo & 3Cr-1Mo-¼V 材料和制造的技术要求
      9 DEP 30.10.02.34-Gen. Casting requirements for pressure retaining and rotating equipment components 受压元件和转动元件铸造技术要求
      10 DEP 30.10.02.35-Gen. Technical requirements for the supply of components in 6Mo austenitic, 22Cr duplex and 25Cr super duplex stainless steel 用于元件的 6Mo 奥氏体不锈钢, 22Cr 双相不锈钢和 25Cr 超级双相不锈钢的技术要求
      11 DEP 30.10.02.36-Gen. Materials and fabrication requirements for 1¼Cr-½Mo pressure vessels (amendments/supplements to API RP 934-C and API RP 934-E) 用于压力容器的 1¼Cr-½Mo材料和制造技术要求(对API934和API934-E的增补)
      12 DEP 30.10.05.11-Gen. A Plant model construction and review 工厂建模和审查
      13 DEP 30.10.60.18-Gen. A Welding of metals (amendments/supplements to API RP 582) 金属材料焊接(对API582的增补)
      14 DEP 30.10.60.30-Gen. A Welding on pressurized pipes (amendments/supplements to API Standard 1104) 压力管道的焊接(对API1104的增补)
      15 DEP 30.10.60.31-Gen. A Oxidation of stainless steel weldments 不锈钢焊接件的氧化反应
      16 DEP 30.10.60.32-Gen. Welding of metals, based on ISO standards 金属材料的焊接,基于ISO标准
      17 DEP 30.10.73.10-Gen. A Cathodic protection 阴极保护
      18 DEP 30.10.73.31-Gen. A Design of cathodic protection systems for onshore buried pipelines and on-plot piping (amendments/supplements to ISO 15589-1:2003) 埋地管道和站内管道阴极保护系统设计(对ISO15589-2003的增补)
      19 DEP 30.10.73.32-Gen. A offshore Cathodic Protection Systems for Subsea Pipelines and Hardware (Amendments/Supplements to ANSI/NACE SP0607-2007/ISO15589-2) 海底管道和设备阴极保护系统
      20 DEP 30.10.73.33-Gen. A Installation and commissioning of onshore cathodic protection systems 陆上阴极保护系统的安装和试运
      21 DEP 30.48.00.31-Gen. A Protective coatings for onshore and offshore facilities 陆上和海上设施保护涂层
      22 DEP 30.48.00.32-Gen. Coating of fasteners 紧固件涂层
      23 DEP 30.48.40.31-Gen. A Thermal spray coatings of aluminum 铝的热喷涂
      24 DEP 30.48.60.10-Gen. A Rubber-lined process equipment 带橡胶衬里的工艺设备
      25 DEP 30.48.60.12-Gen. A Design and installation of chemical-resistant protecting system for concrete surfaces (based on EN 14879-Parts 1, 3,5 and 6) 混凝土表面耐化学保护系统的设计和安装(对EN14879第1,3,5,和6部分的增补)
      26 DEP 30.48.60.13-Gen. A Design and installation of chemical-resistant brick lining for process equipment (based on EN 14879-Parts 1, 4 and 6) 工艺设备耐化学砖衬里的设计和安装(基于EN14879-第1,4,6部分)
      27 DEP 30.55.03.30-Gen. Validation of NDE for fabrication inspection 无损检测的批准
      28 DEP 30.55.03.31-Gen. NDT vendor capability assessment for fabrication inspection 无损检测厂家能力评估
      29 DEP 31.01.10.10-Gen. A Chemical injection systems for upstream production facilities 上游生产设施的化学注入系统
      30 DEP 31.01.10.11-Gen. Corrosion prevention and control of water injection systems 注水系统的腐蚀防护和控制
      31 DEP 31.10.00.10-Gen. A Positive material identification (PMI) program 材料可靠性鉴别(PMI)程序
      32 DEP 31.10.00.31-Gen. A Noise control (amendments/supplements to ISO 15664) 噪声控制(对ISO15664的增补)
      33 DEP 31.10.03.10-Gen. A Symbols and identification system – Mechanical 机械设备的符号和识别系统
      34 DEP 31.22.00.12-Gen. UT in lieu of RT for code construction of pressure equipment 承压设备用超声波代替射线的代码结构
      35 DEP 31.22.00.30-Gen. Equipment criticality in pressure vessel design 压力容器设计的临界条件
      36 DEP 31.22.00.31-Gen. Unfired pressure vessels 非明火压力容器
      37 DEP 31.22.10.35-Gen. A Manufacturing report for pressure vessels 压力容器制造报告
      38 DEP 31.22.30.14-Gen. A Glass-fibre reinforced plastic vessels 玻璃钢容器
      39 DEP 31.24.40.12-Gen. A Fabric expansion joints (endorsement of RAL-GZ 719) 非金属补偿器(对RAL-GZ719的增补)
      40 DEP 31.24.40.31-Gen. A Materials for high-temperature conversion process furnace parts 高温转换过程炉部件用材料
      41 DEP 31.36.10.30-Gen. A Hydraulic systems for the operation of on/off valves in protective functions 用于保护功能开关阀门操作的液压系统
      42 DEP 31.38.01.10-Gen. A Piping class – Basis of design 管道等级-设计基础
      43 DEP 31.38.01.11-Gen. A Piping – General requirements 配管-通用要求
      44 DEP 31.38.01.12-Gen. A Piping classes – Refining and chemicals 管道等级-炼油和化工
      45 DEP 31.38.01.13-Gen. A Compilation of bill of material for piping isometrics ISO图材料表
      46 DEP 31.38.01.15-Gen. A Piping classes – Exploration and production 管道等级-勘探与生产
      47 DEP 31.38.01.19-Gen. A Water injection in downstream hydroprocessing units for corrosion control 下游加氢处理单元中注水的腐蚀控制
      48 DEP 31.38.01.20-Gen. Design of injection points, injection systems, and mix points 加入点、注入系统和混合点的设计
      49 DEP 31.38.01.21-Gen. A Compilation of a specification for piping systems 配管系统技术规格书
      50 DEP 31.38.01.23-Gen. Piping classes – CSA Z662 管道等级-CSA Z662
      51 DEP 31.38.01.29-Gen. A Pipe supports 管道支撑
      52 DEP 31.38.01.31-Gen. A Shop and field fabrication of piping 管道工厂预制和现场制作
      53 DEP 31.38.30.11-Gen. A Protective heating of piping systems (non-electrical) 管道伴热系统(非电伴热)
      54 DEP 31.40.10.19-Gen. A Glass-fibre reinforced plastic pipeline and piping systems 玻璃钢管道和配管系统
      55 DEP 31.40.10.20-Gen. A Spoolable fibre-reinforced plastic pipes 螺旋型玻璃钢管线
      56 DEP 31.40.20.32-Gen. A CRA clad and CRA-lined steel pipe (amendments/supplements to API Spec 5LD) CRA内涂和CRA内衬钢管(对API5L的增补)
      57 DEP 31.40.20.33-Gen. A Linepipe induction bends (amendments/supplements to ISO 15590-1) 热弯弯管用线路用管(对ISO15590的增补)
      58 DEP 31.40.20.34-Gen. A Welded and seamless duplex and super duplex stainless steel line pipe (amendments/supplements to API Spec 5LC) 焊接、无缝双相不锈钢和超级双相不锈钢线路用管(对API 5LC的增补)
      59 DEP 31.40.20.36-Gen. A Weldable martensitic stainless steel line pipe for use in oil and gas operations (amendments/supplements to API SPEC 5LC) 用于油气操作环境的可焊接马氏体不锈钢线路用管(对API5LC的增补)
      60 DEP 31.40.20.37-Gen. A Line pipe for critical service (amendments/supplements to ISO3183:2012 and API SPEC 5L 45th edition) 苛刻环境线路用管(对ISO3183-2012和API5L 第45版的增补)
      61 DEP 31.40.20.38-Gen. Selection and design of thermoplastic and composite pipeline materials for onshore use 陆上管道热塑性塑料和复合管的选择和设计
      62 DEP 31.40.20.39-Gen. High density polyethylene pipelines and piping systems for oilfield applications 高密度聚乙烯管道和配管在油田的应用
      63 DEP 31.40.21.30-Gen. A Pipeline fittings (amendments/supplements to ISO 15590-2) and low temperature process piping fittings 线路管件(对ISO15590-2的增补)和低温环境用管件
      64 DEP 31.40.21.34-Gen. A Carbon and low alloy steel pipeline flanges for use in oil and gas operations (amendments/supplements to ISO 15590-3) and low temperature carbon steel flanges for piping (amendments/supplements to ASTM A350 GR LF2) 适用于油气介质的碳钢和低合金钢管法兰(对ISO15590-3的增补),低温碳钢管法兰(对ASTM A350 GR LF2的增补)
      65 DEP 31.40.30.31-Gen. A External polyethylene and polypropylene coating for line pipe (amendments/supplements to ISO/DIS 21809-1:2009) 管线用聚乙烯和聚丙烯外涂层(对ISO/DIS21809-2007的增补)
      66 DEP 31.40.30.32-Gen. A External fusion-bonded epoxy powder coating for line pipe amendments/supplements to ISO 21809-2:2007) 溶剂环氧树脂粉末涂层(对ISO21809-2:2007的增补)
      67 DEP 31.40.30.33-Gen. A Bituminous enamel coating of steel linepipe 钢管沥青搪瓷涂层
      68 DEP 31.40.30.34-Gen. A Thermoplastic lined pipelines for onshore use 用于陆上管道的热塑性塑料衬里管道
      69 DEP 31.40.30.35-Gen. A Internal coating of line pipe for non-corrosive gas transmission service(amendments/supplements to ISO 15741) 非腐蚀性气体输送管道内涂层(对ISO15741的增补)
      70 DEP 31.40.30.36-Gen. A Elastomer coatings and Monel sheathing for offshore riser protection 用于海上立管保护的弹性体涂料和蒙乃尔衬板
      71 DEP 31.40.30.37-Gen. A External field joint and rehabilitation coating systems for line pipe(amendments/supplements to ISO 21809-3:2008) 管线现场连接接头和补伤系统(对ISO21809-2:2008的增补)
      72 DEP 31.40.30.39-Gen. Internal fusion-bonded epoxy powder coating for water injection line pipe 注水管线用内部熔结环氧粉末涂层
      73 DEP 31.46.00.31-Gen. A Acoustic insulation for piping (amendments/supplements to ISO 15665) 管道隔音层(对ISO15665的增补)
      74 DEP 31.76.10.10-Gen. A Heating, ventilation and air conditioning for plant buildings 厂房的采暖、通风和空调
      75 DEP 34.51.01.31-Gen. A Vertical steel storage tanks – Selection design and construction (amendments/supplements to EN 14015) 钢制立式储罐-选型设计和施工(对EN14015的增补)
      76 DEP 34.51.01.33-Gen. A Field erected aboveground vertical storage tanks(amendments/supplements to API Standard 650) 地上立式储罐的现场建造(对API650的增补)
      77 DEP 34.51.01.35-Gen. Shop welded vertical tanks for storage of production liquids (amendments/supplements to API 12F) 储存液体用立式储罐的工厂焊接(对API12F的增补)
      78 DEP 34.51.01.36-Gen. Shop fabricated vertical storage tanks (amendments/supplements to API STD 650 – Annex J) 立式储罐工厂预制(对API659-附录J的增补)
      79 DEP 34.51.11.30-Gen. A Mounded horizontal cylindrical vessels for pressurised storage of LPG at ambient temperatures (amendments/supplements to EEMUA 190) 在环境温度下储存LPG的半埋式水平瓶组(对EEMUA190的增补)
      80 DEP 34.51.90.10-Gen. A Demolition of storage tanks (endorsement of EEMUA 154) 储罐的拆除(对EEMUA154认可)
      81 DEP 37.19.30.30-Gen. A offshore Cathodic protection systems for fixed offshore steel structures (amendments/supplements to NACE SP0176-2007) 海上钢结构阴极保护系统(对NACE 0176-2007的增补)
      82 DEP 37.76.10.10-Gen. A offshore HVAC for offshore installations (amendments/supplements to ISO 15138) 海上设施的采暖通风和空调(对ISO15138的增补)
      83 DEP 37.81.20.31-Gen. offshore Galvanic anodes for marine structures and pipelines – Specification and qualification – Modifications to ISO 15589-2 海上结构和管线用牺牲阳极-技术要求和条件–对ISO15589-2的修订
      84 DEP 37.81.20.40-Gen. Impressed current laboratory testing of aluminum alloy anodes (amendments/supplements to NACE Std TM0190-2006) 铝合金阳极外加电流实验室测试(对NACE TM190-2006的增补)
      85 DEP 37.81.20.41-Gen. Laboratory testing of metals for resistance to sulfide stress cracking and stress corrosion cracking in H2S environments (amendments/supplements to NACE TM0177:2005) 在H2S环境下金属抗硫化氢盈利开裂和应力腐蚀开裂的实验室测试(对NACE TM0177-2005的增补)
      86 DEP 37.81.40.30-Gen. Syntactic foam insulation for flowlines 单井管线复合泡沫塑料保温
      87 DEP 37.81.40.34-Gen. Insulation for pipe-in-pipe (PIP) flowlines 管中管单井管线的保温
      88 DEP 37.81.40.39-Gen. offshore Welding of subsea hardware and tie-in components (amendments/supplements to ASME boiler and pressure vessel code section IX) 海底设施的焊接和tie-in部件(对ASME锅炉和压力容器标准第9章)
      89 DEP 37.81.40.40-Gen. External Monel clad riser pipe 外部包覆蒙乃尔合金立管
      90 DEP 37.81.40.41-Gen. A Hyperbaric welding of pipelines (amendments/supplements to ISO 13847) 氧气管道的焊接(对ISO13847的增补))
      91 DEP 37.81.41.36-Gen. offshore Deepwater syntactic foam insulation for subsea structures 用于海底结构深水复合泡沫塑料保温层
      92 DEP 37.81.41.37-Gen. offshore Qualification of insulation for deepwater applications 用于深水保温材料的要求
      93 DEP 39.01.10.11-Gen. A Selection of materials for life cycle performance (upstream facilities) – Materials selection and corrosion management 生命周期内的选材(上游设施)-材料选择和腐蚀管理
      94 DEP 39.01.10.12-Gen. A Selection of materials for life cycle performance (upstream equipment) including H2S-containing environments (amendments and supplements to ISO 15156:2009) 生命周期内的选材(上游设备),包括含H2S环境(对ISO15156-2009的增补)
      95 DEP 39.01.10.30-Gen. offshore Specification for nickel base alloy 625 plus (UNS N07716) and alloy 725 (UNS N07725) for oil and gas drilling and production equipment 油气钻井和生产设备用镍基合金625以上(UNS N07716)和725(UNS N07725)技术要求
      96 DEP 39.01.10.32-Gen. A Specification of nickel base alloy 718 (UNS N07718) for oil and gas drilling and production equipment (amendments/supplements to API Standard 6A718) 油气钻井和生产设备用镍基合金718(UNS N07718)技术要求
      97 DEP 44.24.32.30-Gen. Unshaped refractory materials for monolithic refractory linings 用于单片耐火衬里的散装耐火材料
      98 DEP 44.24.32.31-Gen. Classification of unshaped refractory lining materials 散装耐火衬里材料的分类
      99 DEP 44.24.32.32-Gen. Specification for sampling and testing of unshaped refractory lining materials 散装耐火衬里取样和测试技术要求
      100 DEP 44.24.32.33-Gen. Specification for anchoring systems of unshaped refractory lining materials 用于锚泊系统散装耐火衬里的技术要求
      101 DEP 44.24.32.34-Gen. High temperature insulating materials for refractory applications 用于耐火材料隔热的高温绝热材料
      102 DEP 44.24.90.31-Gen. A Refractory bricks and shapes 耐火砖
      103 DEP 44.24.90.32-Gen. Classification of refractory bricks and shapes 耐火砖的分类
      104 DEP 44.24.90.33-Gen. Specification for sampling and testing of refractory bricks and shapes 耐火砖取样和测试技术要求
      105 DEP 44.24.90.34-Gen. Classification, specification and testing for ancillary materials for refractory brick construction 耐火砖施工过程中辅助材料的分类、技术要求和测试
      106 DEP 44.24.90.35-Gen. Specification and quality control for precast or specialty cast refractory baffle wall tile (shapes) 预制或特殊浇筑的耐火防水挡墙的技术要求和质量控制
      107 DEP 61.10.08.11-Gen. A Field inspection prior to commissioning of mechanical equipment 机械设备试运前的现场检测
      108 DEP 61.38.10.10-Gen. A Shop and field fabrication of orifice meter runs 孔板计量回路工厂预制和现场预制
      109 DEP 61.40.20.30-Gen. A Welding of pipelines and related facilities (amendments/supplements to ISO 13847:2000) 管道和相关设施的焊接(对ISO13847-2000的增补)
      110 DEP 61.40.20.31-Gen. A Welding of duplex and super duplex stainless steel pipelines (amendments/supplements to ISO 13847) 双相不锈钢和超级双相不锈钢管线的焊接(对ISO13847的增补)
      111 DEP 61.40.20.36-Gen. Welding of CRA-clad or CRA-lined pipe materials(amendments/supplements to API STD 1104:21st edition) CRA内涂和CRA内衬管道材料的焊接(对API1104第21版的增补)
      112 DEP 64.24.32.11-Gen. A Refractory linings for sulphur recovery units (Claus and SCOT) 硫磺回收装置用耐火内衬(CLAUS和SCOT)
      113 DEP 64.24.32.12-Gen. Refractory lining for fluidized catalytic cracking unit (FCCU) 用于流化催化裂化装置(FCCU)的耐火内衬
      114 DEP 64.24.32.31-Gen. Construction details for refractory brick and shape construction 耐火砖和成型施工详细要求
      115 DEP 64.24.32.33-Gen. Guidelines for curing, drying and firing of unshaped refractory lining materials 散装耐火内衬材料固化、干燥和烧结指南
      116 DEP 64.24.32.34-Gen. Refractory contractor selection and applicator qualification for installation of unshaped refractory lining materials 散装耐火内衬材料施工承包商的选择和供应商资质要求
      117 DEP 64.24.32.35-Gen. Construction design details of unshaped refractory materials 散装耐火材料设计规定
      118 DEP 70.10.70.11-Gen. A Preservation of new and old equipment standing idle 新建和已建设备的停产保护
      119 DEP 74.00.10.10-Gen. A Shop and field pressure testing of piping systems 管道系统的工厂和现场试压
      120 DEP 80.36.00.30-Gen. A Relief devices – selection, sizing and specification (amendments/supplements to API STD 520 Part I:2014) 泄放装置-选择、计算和技术要求(对API520第1部分-2014的增补)
      121 DEP 80.45.10.10-Gen. A Design of pressure relief, flare and vent systems (amendments/supplements to API RP 520 Part II and API STD 521 Chapter 5) 压力泄放、放空和排放系统设计(对API520第2部分和API521第5章的增补)
      122 DEP 80.46.30.11-Gen. A Interlocking systems for pressure relief valves 安全阀连锁系统
      9. Operations Excellence & Asset Management操作和资产管理
      1 DEP 01.00.09.10-Gen. A Operational tagging requirements 操作标识要求
      2 DEP 70.08.10.11-Gen. A Mechanical and electrical maintenance equipment and tools 机械和电气维修设备和工具
      3 DEP 70.10.90.11-Gen. A Spare parts 备品备件
      4 DEP 82.00.10.30-Gen. A Engineering information specification (EIS) 工程信息规范
      10. Petroleum Enginerring 石油工程
      1 DEP 25.80.10.10-Gen. Formation pore pressure, fracture gradient (PP/FG) and borehole stability prediction for exploration, appraisal and development wells, well entries, and abandonments
      2 DEP 25.80.10.11-Gen. Formation tops, fault intersections, and fluid fill prediction for exploration, appraisal, and development wells
      3 DEP 25.80.10.12-Gen. Prepare and maintain data in support of well emergencies – New wells and new activities on existing wells
      4 DEP 25.80.10.13-Gen. Geohazards assessment for offshore exploration, appraisal and development operations
      5 DEP 25.80.10.14-Gen. Geohazards and surface location assessment for onshore exploration, appraisal and development operations
      6 DEP 25.80.10.15-Gen. Design a logging program
      7 DEP 25.80.10.16-Gen. Compaction and subsidence prediction
      8 DEP 25.80.10.18-Gen. Prediction of hydrogen sulphide content in overburden fluids and produced reservoir fluids for new and existing wells
      9 DEP 25.80.10.19-Gen. Sand failure assessment for wells to be completed and produced
      10 DEP 25.80.10.20-Gen. Planning and design of geophysical surveys
      11 DEP 25.80.10.21-Gen. Well stimulation
      12 DEP 25.80.10.22-Gen. Top-seal integrity assessment for primary recovery, waterflood, EOR and CO2 storage
      11. Pipeline, Flow Assurance System & Subsea线路,流动保障和海底管线
      1 DEP 31.27.00.20-Gen. Design and supply of bulk solids bins and hoppers
      2 DEP 31.27.00.21-Gen. Vibrating fluid bed drier/cooler systems
      3 DEP 31.27.00.22-Gen. Enclosed drag conveyors
      4 DEP 31.27.00.23-Gen. General purpose screw conveyors
      5 DEP 31.27.00.24-Gen. Loss-in-weight feeders
      6 DEP 31.27.00.25-Gen. Pressure Process Filters and Systems – Technology Selection, Design and Manufacture
      7 DEP 31.27.00.26-Gen. Trough belt conveyors
      8 DEP 31.27.00.27-Gen. Dilute phase pneumatic conveying systems
      9 DEP 31.27.00.28-Gen. Filter presses technology selection, design and manufacture
      10 DEP 31.27.00.29-Gen. Vacuum belt filter selection, design and manufacture
      11 DEP 31.27.00.30-Gen. Rotary drum vacuum filter selection, design and manufacture
      12 DEP 31.27.00.31-Gen. Decanter centrifuge selection, design and manufacture
      13 DEP 31.27.00.32-Gen. General purpose baghouse dust collectors selection, design and manufacture
      14 DEP 31.27.00.33-Gen. Design and manufacture of rotary valves (rotary air locks)
      15 DEP 31.36.00.30-Gen. A Pipeline transportation systems – pipeline valves (amendments/supplements to API SPEC 6D)
      16 DEP 31.38.60.10-Gen. A Hot-tapping on pipelines, piping and equipment
      17 DEP 31.40.00.10-Gen. A Pipeline engineering (amendments/supplements to ISO 13623)
      18 DEP 31.40.00.11-Gen. A Pipeline and subsea integrity – Design and construction
      19 DEP 31.40.10.10-Gen. A Riser design
      20 DEP 31.40.10.12-Gen. A Design of multiple-pipe slug catchers
      21 DEP 31.40.10.13-Gen. A Design of pipeline pig trap systems
      22 DEP 31.40.10.15-Gen. A Analysis of spans for submerged pipelines
      23 DEP 31.40.10.16-Gen. A Upheaval buckling of pipelines
      24 DEP 31.40.10.18-Gen. A Pipeline engineering – Reliability-based limit states methods (amendments/supplements to ISO 16708)
      25 DEP 31.40.11.32-Gen. Survey technical standards for offshore pipeline, flowline and umbilical riser projects and positioning services
      26 DEP 31.40.21.31-Gen. A Pipeline isolating joints (amendments/supplements to ISO 15590-2:2003)
      27 DEP 31.40.21.33-Gen. A Pig signallers – intrusive type
      28 DEP 31.40.21.37-Gen. Corrosion resistant alloy overlay subsea pipe and fittings excluding line pipe
      29 DEP 31.40.30.30-Gen. A Concrete coating of linepipe (amendments/supplements to ISO 21809-5)
      30 DEP 31.40.40.38-Gen. A Hydrostatic pressure testing of new pipelines
      31 DEP 31.40.50.30-Gen. A Precommissioning of pipelines
      32 DEP 31.40.60.11-Gen. A Pipeline leak detection
      33 DEP 37.80.00.30-Gen. A Subsea production systems
      34 DEP 37.80.00.33-Gen. A Design and operation of subsea production control systems (amendments/supplements to API STD 17F)
      35 DEP 37.80.00.35-Gen. Subsea pipeline valves (amendments/supplements to ISO 14723)
      36 DEP 37.80.00.36-Gen. Deepwater subsea vertical tree systems (amendments/supplements to ISO 13628-4/API 17D)
      37 DEP 37.80.00.38-Gen. Deepwater jumper design, measurement, fabrication and testing
      38 DEP 37.80.01.30-Gen. High pressure subsea valves (amendments/supplements to section 7.10 of ISO 13628-4/API 17D)
      39 DEP 37.80.02.31-Gen. A Seamless super duplex tubing manufacturing specification for umbilicals and subsea distribution hardware
      40 DEP 37.80.02.32-Gen. Seam welded super duplex tubing manufacturing specification for umbilicals and subsea distribution hardware
      41 DEP 37.80.02.33-Gen. A Zinc clad duplex tubing manufacturing specification
      42 DEP 37.80.02.35-Gen. A Medium voltage, 6kV (Um = 7.2kV) to 30kV (Um = 36kV), power conductors for deepwater umbilicals
      43 DEP 37.80.02.36-Gen. Deepwater umbilical manufacturing (amendments/supplements to ISO 13628-5:2009)
      44 DEP 37.80.02.37-Gen. A Deepwater subsea controls, power, and chemical distribution manufacturing specification
      45 DEP 37.80.03.30-Gen. Umbilical transportation and installation (amendments/supplements to ISO 13628-5:2009)
      46 DEP 37.80.03.31-Gen. Deepwater subsea distribution hardware installation
      47 DEP 37.80.10.30-Gen. Deepwater subsea completion/workover systems (amendments/supplements to API SPEC 17G)
      48 DEP 37.80.30.30-Gen. Deepwater subsea hardware ROV interfaces (amendments/supplements to API RP 17H)
      49 DEP 37.81.10.15-Gen. Pipe-soil interaction on a soft clay seabed
      50 DEP 37.81.40.31-Gen. A Welding of deepwater pipelines, flowlines and steel catenary risers (amendments and supplements to API 1104)
      51 DEP 37.81.40.32-Gen. A Automated ultrasonic inspection (AUT) of girth welds for carbon steel and CRA lined pipelines, flowlines and catenary risers
      52 DEP 37.81.40.35-Gen. Deepwater collet type connector systems
      53 DEP 37.81.40.38-Gen. Deepwater subsea manifold system (amendments/supplements to ISO 13628-15/API RP 17P)
      54 DEP 37.81.41.30-Gen. Onshore fabrication of deepwater pipelines, flowlines, risers and their appurtenances
      55 DEP 37.81.41.33-Gen. Offshore construction specification for deepwater pipelines, flowlines and risers
      56 DEP 37.81.41.35-Gen. Offshore pipeline and umbilical/cable crossings
      57 DEP 37.81.42.30-Gen. Unbonded flexible pipe for offshore applications (amendments/supplements to API SPEC 17J; API RP 17B; API SPEC 17L1 and endorsement of API RP 17L2)
      58 DEP 37.81.42.31-Gen. Deepwater pipeline end terminations and midline sleds
      59 DEP 37.81.42.34-Gen. ROV operations for work-class vehicles
      60 DEP 37.81.42.35-Gen. A Qualification of girthweld inspection with automated ultrasonic inspection (AUT) systems
      12. Process Autimation, Control, and optimization工艺控制和优化
      1 DEP 32.00.00.12-Gen. A Fiscal and sales allocation models for Upstream production systems 上游生产系统的财务和销售分配模式
      2 DEP 32.01.20.12-Gen. Process Control Domain – Enterprise industrial automation information technology and security
      3 DEP 32.01.40.31-Gen. A Requirements for real-time production operations and production-critical real time data
      4 DEP 32.10.03.10-Gen. Instrumentation symbols and identification on process engineering flow schemes
      5 DEP 32.30.20.11-Gen. A Fire, gas and smoke detection systems 火气和烟雾检测系统
      6 DEP 32.30.20.12-Gen. Process automation system (PAS) architecture design specification
      7 DEP 32.30.20.13-Gen. A Intelligent field devices – Design and configuration
      8 DEP 32.30.20.14-Gen. Instrument asset management 仪表评估管理
      9 DEP 32.30.20.15-Gen. A DCS basic application standards
      10 DEP 32.30.20.16-Gen. A Baselayer control applications
      11 DEP 32.30.20.17-Gen. Integration of motor controls into BPCs
      12 DEP 32.30.20.18-Gen. Real-time optimization project standards
      13 DEP 32.31.00.32-Gen. A Instruments for measurement and control 计量和控制仪表
      14 DEP 32.31.00.34-Gen. A Instrumentation documents and drawings 仪表文件和图纸
      15 DEP 32.31.00.35-Gen. Smartplant instrumentation (SPI) – Project execution SPI-项目执行
      16 DEP 32.31.09.31-Gen. A Instrumentation for packaged equipment 撬装设备用仪表
      17 DEP 32.31.50.10-Gen. A On-line process analysers 在线分析仪
      18 DEP 32.31.50.13-Gen. A Analyser housing 分析化验室
      19 DEP 32.32.00.11-Gen. A Custody transfer measurement systems for liquids 液体贸易计量系统
      20 DEP 32.32.00.12-Gen. A Custody transfer measurement systems for gases and vapours 气体贸易计量系统
      21 DEP 32.32.00.13-Gen. A Flow rate measurement in wet gas environments by means of Venturi tubes and tracer dilution technology
      22 DEP 32.36.01.17-Gen. A Control valves – Selection, sizing, and specification 控制阀的选择、计算和技术要求
      23 DEP 32.36.01.18-Gen. Selection and procurement of actuators for on-off valves 开关阀执行机构的选型和采购
      24 DEP 32.37.10.11-Gen. A Installation of on-line instruments 在线仪表的安装
      25 DEP 32.37.20.10-Gen. A Instrument signal lines 仪表信号线
      26 DEP 32.45.10.10-Gen. A Instrumentation of depressuring systems 减压系统用仪表
      27 DEP 32.80.10.10-Gen. A Instrumented protective functions (IPF) 仪表保护功能
      28 DEP 32.80.10.14-Gen. A Alarm management 报警管理
      29 DEP 62.10.08.11-Gen. A Inspection and functional testing of instruments 仪表检测和功能测试
      13. Process Engineering 工艺设计
      1 DEP 01.00.01.30-Gen. A Definition of temperature, pressure and toxicity levels 温度、压力和毒性级别的定义
      2 DEP 01.00.02.11-Gen. A Preparation of process flow schemes and process engineering flow schemes PFD和PID的准备
      3 DEP 01.00.02.12-Gen. A Preparation of Safeguarding Memoranda and Process Safeguarding Flow Schemes 安全防护说明书和工艺安全防护流程图的准备
      4 DEP 10.02.51.11-Gen. A Steam injection systems for safeguarding thermal cracking units 用于保护热裂化单元的蒸汽喷射系统
      5 DEP 20.04.10.10-Gen. A Glycol-type gas dehydration systems 甘醇脱水系统
      6 DEP 20.04.10.11-Gen. Bulk separation and oil treatment facilities 容积式分离器和原油处理设施
      7 DEP 30.06.10.11-Gen. A Equipment in LPG processing installations LPG处理设备
      8 DEP 30.06.10.12-Gen. A Pressurised bulk LPG storage installations at processing facilities 处理设施中的LPG压力储罐
      9 DEP 30.06.10.13-Gen. A LPG bulk road, rail and pipeline transportation LPG道路、火车和管道运输
      10 DEP 30.06.10.14-Gen. Cylinder filling plants and bulk transfer facilities for depots and filling plants 储装站内瓶装站和散装转运站
      11 DEP 30.06.10.16-Gen. Pressurised bulk storage installations for LPG – at depots, filling plants and large bulk customers LPG压力储罐–用于储装站、瓶装站和大规模用户
      12 DEP 30.06.10.18-Gen. Pressurised bulk storage installations for LPG – at small customer premises LPG压力储罐–用于小规模用户
      13 DEP 30.06.10.20-Gen. A ESD systems for loading and discharging liquefied gas carriers 液化气装卸船ESD系统
      14 DEP 30.06.10.30-Gen. LPG storage and vehicle fuelling installations at retail sites 零售LPG储存和加气设施
      15 DEP 30.06.10.31-Gen. CNG vehicle fueling installations CNG加气设施
      16 DEP 30.06.10.32-Gen. LNG storage and fuelling installations at retail and commercial sites LNG储存和加气站–零售和商业销售
      17 DEP 31.06.11.11-Gen. A Loading facilities for bulk road vehicles 汽车装车设施
      18 DEP 31.20.20.31-Gen. A Internals for columns 塔内件
      19 DEP 31.22.05.11-Gen. A Gas/liquid separators – Type selection and design rules 气液分离器–选型和设计原则
      20 DEP 31.22.05.12-Gen. A Liquid/liquid and gas/liquid/liquid separators – Type selection and design rules 液液分离器和气液液分离器–选型和设计原则
      21 DEP 31.22.50.31-Gen. Design and installation of the bottom support structure for molecular sieve units 分子筛底部支撑结构的设计和安装
      22 DEP 31.27.21.10-Gen. A Filters for removing particles from hydroprocessor feeds – type selection and design rules 过滤器的选型和设计原则
      23 DEP 39.01.40.30-Gen. Seawater injection facilities 注海水设施
      24 DEP 39.01.40.31-Gen. Produced water treatment and injection facilities 生产水处理和注入设施
      14. Project Services 项目服务
      1 DEP 82.00.10.12-Gen. A Life cycle costing (endorsement of ISO 15663-1) 全生命周期生产费用(对ISO15663-1的增补)
      15. Quality Assurance 质量保证
      1 DEP 82.00.10.10-Gen. A Project quality assurance 项目质量保证
      16. Rotating Equipment 动设备
      1 DEP 31.25.00.10-Gen. A Hoisting facilities and weather protection for rotating equipment 转动设备的起重设施和防护等级
      2 DEP 31.29.00.10-Gen. A Installation of rotating equipment (amendments/supplements to API RP 686) 转动设备的安装(对API RP686的增补)
      3 DEP 31.29.00.11-Gen. A Condition monitoring of rotating equipment 转动设备的状态监测
      4 DEP 31.29.00.30-Gen. A Oil mist lubrication systems 油雾润滑系统
      5 DEP 31.29.00.32-Gen. A Special purpose gear units for petroleum, chemical and natural gas industry services (amendments/supplements to API 613) 用于石油、化工和天然气杭亚的特殊用途齿轮结构(对API613的增补)
      6 DEP 31.29.00.33-Gen. A Shaft sealing systems for centrifugal and rotary pumps (amendments/supplements to API 682) 离心泵和旋转泵烦人曲轴密封系统(对API682的增补)
      7 DEP 31.29.00.36-Gen. A Flexible couplings for mechanical power transmission – Special purpose applications (amendments/supplements to ISO 10441) 机械传动用挠性联轴器-特殊用途(对ISO10441的增补)
      8 DEP 31.29.00.38-Gen. A General- purpose gear units (amendments/supplements to API 677) 通用齿轮装置(对API677的增补)
      9 DEP 31.29.00.41-Gen. Gears – selection, testing and installation 齿轮的选择、测试和安装
      10 DEP 31.29.00.34-Gen. Dry gas seal for rotating equipment 转动设备的干气密封
      11 DEP 31.29.02.11-Gen. A Pumps – selection, testing and installation 泵的选型、测试和安装
      12 DEP 31.29.02.30-Gen. A Centrifugal pumps (amendments/supplements to ISO 13709) 离心泵(对ISO13709的增补)
      13 DEP 31.29.02.31-Gen. A Sealless centrifugal pumps (amendments/supplements to API 685) 无轴封离心泵(对API685的增补)
      14 DEP 31.29.06.30-Gen. A Centrifugal submerged motor pumps and electro submersible hydraulic turbines 离心式浸没电驱泵和电动浸没式水力透平
      15 DEP 31.29.06.31-Gen. A Seawater lift pumps 海水提升泵
      16 DEP 31.29.12.30-Gen. A Reciprocating positive displacement pumps (amendments/supplements to API 674) 往复式计量泵(对API674的增补)
      17 DEP 31.29.12.31-Gen. Positive displacement pumps – controlled volume (amendments/supplements to API STD 675) 容积式计量泵(对API675的增补)
      18 DEP 31.29.22.11-Gen. Positive displacement pumps – Rotary (amendments/supplements to API 676) 转动式计量泵(对API676的增补)
      19 DEP 31.29.40.10-Gen. A Compressors – Selection, testing, and installation 压缩机的选型、测试和安装
      20 DEP 31.29.40.30-Gen. A Axial, centrifugal and expander compressors (amendments/supplements to API STD 617) 轴向、离心式和膨胀式压缩机(对API617的增补)
      21 DEP 31.29.40.31-Gen. A Reciprocating compressors (amendments/supplements to API 618) 往复式压缩机(对API618的增补)
      22 DEP 31.29.40.32-Gen. A Rotary-type positive displacement compressors (amendments/supplements to API 619) 旋转型容积式压缩机(对API619的增补)
      23 DEP 31.29.40.33-Gen. A Packaged, integrally geared, centrifugal plant and instrument air compressors (amendments/supplements to API 672) 组装型整体齿轮离心式空压机(对API672的增补)
      24 DEP 31.29.40.34-Gen. A Packaged reciprocating gas compressors (amendments/supplements to ISO 13631) 组装型往复式气体压缩机(对ISO13631的增补)
      25 DEP 31.29.42.30-Gen. A Liquid ring vacuum pumps and compressors (amendments/supplements to API STD 681) 液环式真空泵和压缩机(对API681的增补)
      26 DEP 31.29.47.30-Gen. A Centrifugal fans (amendments/supplements to ISO 13705, Annex E) 离心式鼓风机(对ISO13705附录E的增补)
      27 DEP 31.29.47.31-Gen. Centrifugal fans for petroleum, chemical, and gas industry services (amendments/supplements to API 673) 石油、化工和天然气行业用离心式鼓风机(对API673的增补)
      28 DEP 31.29.47.32-Gen. Fans – Selection, testing and installation 鼓风机的选型、测试和安装
      29 DEP 31.29.60.10-Gen. A Steam turbines – Selection, testing and installation 蒸汽透平的选型、测试和安装
      30 DEP 31.29.60.30-Gen. A General-purpose steam turbines (amendments/supplements to API 611) 通用蒸汽透平(对API611的增补)
      31 DEP 31.29.60.31-Gen. A Special-purpose steam turbines (amendments/supplements to API STD 612:2014) 特殊用途蒸汽透平(对API612-2014的增补)
      32 DEP 31.29.60.32-Gen. A Lubrication, shaft-sealing and oil-control systems and auxiliaries (amendments/supplements to ISO 10438) 润滑、曲轴密封和滑油控制系统,及辅助系统(对ISO10438的增补)
      33 DEP 31.29.60.33-Gen. Lubrication, shaft-sealing and oil-control systems – Selection, testing, and installation 润滑、曲轴密封和滑油控制系统的选择、测试和安装
      34 DEP 31.29.70.11-Gen. A Combustion gas turbines – Selection, testing and installation 燃气轮机的选型、测试和安装
      35 DEP 31.29.70.31-Gen. A Gas turbines for the petroleum, chemical, and gas industry services (amendments/supplements to API STD 616) 石油、化工和天然气行业用燃气透平(对API616的增补)
      36 DEP 31.29.80.30-Gen. A Spark ignited and compression ignited engines 火花点火和压燃发动机
      37 DEP 31.51.10.31-Gen. A Tank mixers and agitators 罐式混合器和搅拌器
      38 DEP 32.29.20.10-Gen. A Safeguarding and instrumented protective functions for rotating equipment 转动设备的安全防护和仪表保护
      39 DEP 37.29.01.10-Gen. A Firewater pumps for offshore installations 海上设施用消防泵
      17.Technical Safety Engineering 安全工程
      1 DEP 01.00.02.13-Gen. Process engineering and safeguarding practices (PRENSAP) 工艺设计和安全防护
      2 DEP 34.17.10.35-Gen. A Siting of onshore occupied portable buildings 陆上活动板房选址
      3 DEP 34.17.10.36-Gen. Inflatable blast resistant shelters 充气防爆避难所
      4 DEP 37.01.10.10-Gen. A Offshore production installations basic surface process safety systems 海上生产设施工艺安全系统
      5 DEP 39.01.00.10-Gen. Onshore production installations – Basic process safety systems 陆上生产设施–工艺安全系统
      6 DEP 80.00.00.15-Gen. Hazard and operability (HAZOP) study HAZOP研究
      7 DEP 80.00.10.10-Gen. A Area classification (amendments/supplements to IP 15) 区域划分(对IP15的增补和补充)
      8 DEP 80.10.10.31-Gen. Breathing air and supply systems 呼吸用空气及供给系统
      9 DEP 80.45.10.11-Gen. A Overpressure and underpressure – Prevention and protection 超压和低压保护
      10 DEP 80.45.10.12-Gen. A Emergency depressuring and sectionalizing 紧急泄压和区域划分
      11 DEP 80.45.10.13-Gen. Alternative pressure relief design for assessment of existing facilities 用于评估已建设施的压力泄放替代方案设计
      12 DEP 80.47.10.12-Gen. A Fire protection systems for offshore facilities 海上设施消防系统
      13 DEP 80.47.10.30-Gen. A Assessment and design of the fire safety of onshore installations 陆上设施消防安全设计和评估
      14 DEP 80.47.10.31-Gen. A Active fire protection systems and equipment for onshore facilities 陆上设施主动消防系统和设备
      15 DEP 80.47.10.32-Gen. A Fire-fighting agents and portable/mobile fire fighting equipment for onshore applications 陆上灭火剂和可移动式消防设

    匿名

    回复问题

    匿名网友
    :?: :razz: :sad: :evil: :!: :smile: :oops: :grin: :eek: :shock: :???: :cool: :lol: :mad: :twisted: :roll: :wink: :idea: :arrow: :neutral: :cry: :mrgreen:
    确定

    拖动滑块以完成验证